Link Codes
1. Link Code Position
-
To assign a Link Code Position, click Link Code Position then select from the menu.
Before Point Feature Definition |
employs a link code prior to the Field codes |
After Point Feature Definition |
employs a link code after the Field codes |
2. Link Codes
-
To assign Link Codes, click Link Codes then click the browse button.
-
On the LinkCodes dialog, select the link code to assign.
-
Click in the Alpha or Numeric cell and enter an appropriate value.
-
Click in the Use cell and choose True.
-
Click Accept to enable the modifications.
Accept |
confirm the list and close the dialog |
Add |
include another line in the list for additional types |
Delete |
remove the selected line from the list |
Use |
sets Use column to True |
Exclude |
sets Use column to False |
Reset |
resets the list to default values |
Note: Linking Codes can be Alpha or Numeric values. They can be before or after the Field code. They must be separated from the Field code with a space.
Start |
begins creating a Linear Feature |
StartPC |
starts a linear feature in Arc Mode |
ArcPC |
specifies the beginning of a tangential arc or curve within a Linear Feature |
NonTanPC |
specifies the beginning of a non-tangential arc or curve within a Linear Feature |
ArcSingle |
creates a three point arc with previous and next points (does not work at beginning or end of a Linear Feature) |
ArcToArc |
ends previous tangent arc and begins another tangent arc (must be preceded by ArcPC) |
NonTanPT |
specifies the end of a non-tangential arc or curve within a Linear Feature |
ArcPT |
specifies the end of a tangential arc or curve within a Linear Feature |
ArcToggle |
toggles between NonTanPC and NonTanPT (depends on pairing) |
End |
ends the linear feature (not necessary in most cases) |
CloseShape |
closes the ends of the linear feature by adding right angle at both ends and intersecting |
Close |
closes the Linear Feature back to the first point |